Fluke 050-CLKT 2 Inches (50 Millimeter) C-Range IR Window, KWIK TWIST
Increase safety and efficiency for your electrical maintenance staff and reduce the risk of arc-flash with CLKT infrared windows.
If you are concerned about Arc-Flash but wish to continue with your infrared thermography program infrared windows are the answer. These Arc-Resistant, outdoor certified, infrared windows allow thermal, ultraviolet, visual and fusion technologies to be used without exposing personnel to live equipment.
All infrared windows from Hawk IR International use the unique Quadraband™ multispectral optic, allowing inspection with any camera for total flexibility both now and in the future.
Quadraband ™ OPTIC TECHnOLOGY
Exclusive to Fluke IR Windows, allows you to inspect your equipment with four different types of cameras. Provides maximum flexibility to upgrade or swap out inspection cameras without any IR Window replacement. No other IR Windows manufacturer gives you that flexibility.
AutoGround ™
Automatically grounds at installation for maximum safety and compliance. No additional steps or testing is required. Only avail- able on Fluke IR Windows.
|
Why is available area important?
Understanding the difference between “Optic Diameter” and “Available Area” gives the thermographer a measure of how much infrared energy is passing through the window. The more energy, the better the reading. Using a crystal IR Window means that the entire area is available for infrared transmission for optimum repeatability and results. While a mesh grid may have a larger “Optic Diameter” the grid itself blocks the IR signal, meaning that the amount of radiation available to the camera is significantly reduced and the signal may be irregular. It is a generally accepted fact that due to interference by mesh grids, transmission correction and hence measurement is not possible.
|
![Fluke_CLKT_FOV]() |
Increase the safety and speed of electrical thermography
If you are concerned about arc-flash but wish to continue with your infrared thermography program, infrared windows are the answer. These arc-resistant, outdoor certified, infrared windows allow thermal, ultraviolet, visual and fusion technologies to be used without exposing personnel to live equipment.
All infrared windows from Fluke use the unique Quadraband ™ multispectral optic, allowing inspection with any camera for total flexibility both now and in the future.
| Detailed Specifications |
| Optic Data |
| Crystal Insert Diameter |
50 mm (1.97 in) |
75 mm (2.96 in) |
100 mm (3.94 in) |
| Viewing Aperture Diameter |
43 mm (1.7 in) |
68 mm (2.7 in) |
89 mm (3.5 in) |
| Viewing Aperture Area |
1452 mm 2 (2.25 sq in) |
3632 mm 2 (5.63 sq in) |
6322 mm 2 (9.79 sq in) |
| Thickness |
2 mm (0.08 in) |
2 mm (0.08 in) |
4 mm (0.16 in) |
| CLIRVU Coating |
Yes |
| Shortwave IR Capable |
Yes |
| Midwave IR Capable |
Yes |
| Longwave IR Capable |
Yes |
| Ultraviolet (UV) Capable |
Yes |
| Visual Capable |
Yes |
| Fusion Capable |
Yes |
With a Kwik Twist cover that magnetically sticks to the panel when removed, Fluke IR Windows are easy to use and deliver unmatched image clarity through a CLIRVU® crystal. Exclusive to Fluke IR Windows, CLIRVU crystal technology is impervious to both moisture and vibration. CLIRVU crystals are designed to withstand the extreme pressures and temperatures of an arc-fault event, and offer protection from molten projectiles associated with arc-flashes.
Save Time and Conduct More Efficient Electrical Infrared Inspections
Once you've installed a Fluke infrared window there is no more need to power down or remove panel doors – you may never have to open the panel door again. Inspections are now conducted quickly, easily and safer than they were before.
Your greatest investment is not what's behind the panel door; your priority is to offer the ultimate protection for the electricians, engineers and inspectors who risk their lives every day doing their jobs.